IPTVTunerForPlex: the IPTV client I couldn’t find

·

También disponible en castellano: léelo en castellano.

Almost everything I’ve shared here is small, free, open-source tools, the kind I write over a weekend to scratch an itch. This one is different, and I’d rather tell you in the first line: IPTVTunerForPlex is a commercial application. It’s paid, it has its own licence, and it isn’t open source. It’s also the project I’ve put the most hours into, which is why it deserves a whole post.

The frustration behind it

It started with something that sounded simple: I had an IPTV list and wanted to watch it at home the way I watch everything else. In Plex Live TV, with my channels in my order, and on the Fire TV in the living room without wrestling with the remote every time.

So I went looking for a client that did that. I found things that did a piece of it: one served the list nicely but had nothing for the TV, another had a TV app but no sensible way to protect the traffic, another wanted me to wire up a tuner, a guide and a tunnel by hand with three different programs I’d have to keep alive. Every piece existed on its own. What I couldn’t find, however hard I looked, was a client that put all of it in one place.

And you know how I end up when something doesn’t exist: MediaRenamer, lanwatch… This time, instead of a weekend tool, it turned into a proper application.

What it is, in one sentence

A macOS app that turns your M3U/M3U8 list into a tuner for Plex Live TV and an app for your Fire TV, Android TV or Google TV, with your traffic protected by OpenVPN or an SSH tunnel if you want, and the option of moving the server into a Docker container so everything keeps working with the Mac off. All from a single window, with a single list of favourites.

Two paths, whichever you prefer

Something I want to make very clear, because people tend to assume the opposite: you don’t need Plex to use IPTVTunerForPlex. Despite the name, the app offers two paths that are alternatives, not mandatory steps, and you can stick with one, the other or both at once.

Path 1: with Plex

If you already have a Plex server and Plex clients scattered around the house (the TV, the phone, the tablet, the laptop), the app advertises itself as an HDHomeRun tuner and your channels appear in Plex Live TV, with your guide and your favourites in your order. Nothing new to install on any device: what you already use simply gains live television.

Path 2: without Plex, just the TV app

And if you don’t have Plex, or you’d rather not use it, or you just don’t want one more server standing between you and the TV, you install the TV app directly over ADB on your Fire TV, Android TV or Google TV and that’s it. No Plex server, no Plex clients, no account of any kind. The app plays your favourites in your order, through the Mac or straight to the provider over its own VPN or SSH tunnel.

Both paths share the same things: the same list of favourites, the same channel order and the same traffic protection, set up once. Choosing one doesn’t close the door on the other; you can start with the TV app and add Plex the day you feel like it, or the other way round.

Your traffic, your call

This was the part I cared about most. Watching IPTV means opening a lot of connections to a provider, and neither your ISP nor anyone in between needs to know what you watch or who you connect to. So traffic protection isn’t an add-on: it’s a first-class tab of the app. You get three options and pick one:

  • OpenVPN with split tunnelling: only the channel traffic (or the hosts you add by hand) goes out through the VPN. The rest of your Mac stays on your normal connection, so your mail, downloads and video calls don’t have to go anywhere strange.
  • An SSH tunnel scoped to the app: if you’d rather exit through a server of your own, the app brings the tunnel up and limits it to its own traffic. Nothing else on the system is touched.
  • External protection: if you already protect the connection some other way, such as a VPN router or a separate server, you tell the app and it stays out of the way.

The app remembers which one you use and restores it at start-up, so there’s nothing to remember to switch on. And the Fire TV can play through the Mac or go straight to the provider over its own VPN or SSH tunnel, whichever suits you. To be clear: this doesn’t make you anonymous and it isn’t magic, but it does mean your ISP sees only an encrypted tunnel and your provider sees the VPN or server exit, not your home connection.

The Docker server, installed from the app itself

Serving from the Mac is fine until the day you close it, take it on a trip or it runs out of battery, and at ten at night you have no channels. That’s what Docker mode is for: the same server, in a container, on a NAS, an Orange Pi-style board or any home server (ARM or x64).

What took me the longest, and what I’m happiest with, is that you don’t have to write a docker-compose file or SSH in by hand. From the Docker tab of the desktop app you point it at your Linux host, and the app installs the container over SSH and manages it remotely, with the same tabs as always. Plex and the Fire TV point at it and it keeps serving with the Mac off. If you like this sort of thing, it’s the same self-hosted philosophy as caddy-tui: looking after a server at home shouldn’t be a second job.

The TV app, one click from the Mac

The other half of the problem was the television. IPTVTunerForPlex includes its own app for Fire TV, Android TV and Google TV that plays your favourites in your order, with the same channel numbers as Plex. And installing it is the opposite of the usual routine: you install it straight over ADB from the Mac, in one click, with no hunting for an APK online, no copying it to a USB stick and no typing on the remote. If you’d rather, you can also download it with the Downloader app from the Mac’s own server. Once installed it configures itself and updates from within the app.

I’ve tested it on the Fire TV Stick 4K and the Fire TV Cube, and it works on Android TV devices running Android 6 or later.

And everything else I needed

  • Plex-compatible tuner: it advertises itself as an HDHomeRun and Plex finds it on its own. It remuxes to MPEG-TS with ffmpeg using a profile designed so Plex can Direct Stream instead of transcoding again.
  • Favourites in charge: load lists with tens of thousands of channels, mark yours and drag them into order. That order is the channel number in Plex and on the Fire TV.
  • XMLTV EPG guide, with the option of merging an external source if your provider offers one.
  • Anti-dropout buffer, configurable from 2 to 30 seconds, to absorb the provider’s hiccups.
  • Live monitors and logs: traffic, connections and channel stability, plus the logs of the app, the TV client and Plex in one place.
  • Telegram control (optional): a bot to check the status, switch the VPN on or restart things from your phone, with start-up and error alerts.
  • A local player to test a channel without opening Plex or the Fire TV, and parental control with a password for the adult category.

How you pay, no small print

A one-off licence of €49.95 (VAT included). No subscription, it doesn’t expire and updates are included. It’s tied to one Mac, and if you change machines you write to me and we move it. You pay by card through Stripe and the serial number arrives by email as soon as the payment is confirmed.

And you can try it before you buy: without a licence you can load lists, mark favourites and set up the VPN, the SSH tunnel or Telegram with no limit. What’s limited is watching channels: each playback drops into demo mode and is cut after 20 seconds. Just enough to check it all works in your own home before paying.

Limits, frankly

  • It’s macOS only and requires macOS 26.5 or later. To remux HLS channels it needs ffmpeg (brew install ffmpeg); openvpn, sshpass and privoxy only if you use the VPN or the tunnel, and the Android tools (adb) if you install the TV app from the Mac.
  • It’s signed but not yet notarized by Apple, so macOS will warn you the first time. Right-click, Open and confirm; the website explains the rest.
  • It includes no channels or lists. It’s the bridge between the list you already have and your Plex or your television. It’s up to you to make sure that list and its source have the necessary rights in your country.
  • It’s an independent project, not affiliated with Plex or Amazon.

Where to get it

All the details, the trial, the user manual and the licence purchase are on the official website: www.plexiplabs.es.

If you try it and something doesn’t add up, tell me. It’s the kind of tool that gets better with what people run into using it for real, and I certainly haven’t stopped using it myself.